Did some more shopping

Going to recap the whole unit.
It’s actually not that bad, only a few needed:

Shopping list:

3x  4700uF 16v (originals are axials, but with a bit of creatativity, I’ll use normal radials.

3x 220uF 16V (there’s one on the switch/display board as well)

2x 10uF 50v

1x 100uF 6.3V

These things are dirt cheap, so I ordered a ton of each so I have enough for the proto’s as well.

If I have an hour to spare this weekend, I’ll do the recap.



To top